80-Amp Pro Switch-Mode BEC Brushless ESC, EC5 (V2)
Prodotti simili
When performance matters in your high-current applications look no further than the E-flite® 80-Amp Pro Switch Mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated Switch-Mode BEC. It can operate without the need for aseparate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 80 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage. Featuring an exposed, finned heat sink aluminum case with lightweight plastic endcaps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking,timing, throttle input range, and more, the E-flite 80-Amp Pro Switch Mode ESC is truly a ‘pro series’ electronic speed control.
This product is not intended for use by children under 14 years of age without direct adult supervision.
- 3–6S Li-Po, 9- to 18-cell Ni-Cd/Ni-MH input voltage
- 5-volt Switch-Mode BEC circuit capable of 2.5-amp continuous current on any recommended input voltage
- Drives up to 7 analog or 6 digital standard-sized servos, with the BEC on any recommended input voltage
- Up to 80-amp continuous current with proper air flow, 100-amp peak
- Forward: Yes
- Brake: Yes
- Time Delay Brake: Yes
- Continuous Maximum Current: 80A
- Input Connector Types: EC5, 10AWG
- Output Connector Types: 4mm Gold Bullet, 12AWG
- Momentary Peak Current: 100A
- Length: 3.0 in (77mm)
- Width: 1.6 in (41mm)
- Height: 0.62 in (15.5mm)
- Weight: 3.75 oz (106g)
- BEC Voltage: 5.5V Switch-mode
- Overload Protection: Yes
- Cells w/BEC: 9-18 cells NiMH, 3-6S LiPo
- Auto Cutoff: Yes
