DeNight Special 50 ARF

Codice prodotto: HAN4745
Produttore: Hangar 9
Il prezzo della consegna standard per questo articolo è di €9,50 (la spedizione è gratuita per ordini superiori a 99€). Gli ordini inseriti oggi prima delle 15.00 CET verrano evasi entro le 24 ore successive (eccetto per articoli su ordinazione/presso fornitore/non in stock).
Disponibile presso il nostro fornitore 5 giorni (da verificare)
267.90€ iva inclusa

Air racing is as popular now as it was a during the early years of powered aviation and modellers
looking to combine the spirit of the past with speed and performance in the form of a scale
classic racer should look no further than Hangar 9’s latest release, the Denight Special.

This great looking model delivers great flying characteristics together with all the looks and
glamour of a bygone age in air racing.
This almost ready to fly plane is a scale model of Bart Denight’s 1950’s Reno racer, complete
with its traditional trim cream and red colour scheme and matching helmeted pilot.

Hangar 9’s Denight Special provides the look of a classic racer with a smooth, crisp, and precise
flight performance that is well within the grasp of less experienced pilots. This is due in part to
the generous wing area and light wing loading and the lightweight balsa and plywood used in
construction.
A comprehensive hardware pack and photo illustrated assembly guide make assembly a quick
and enjoyable experience and the model may be made flight ready in a few evenings, perhaps
less if choosing electric power and for modelers using a conventional two or four stroke engine a
transparent dummy engine cowling is included making cowling installation a lot easier.

The model may be powered by either a conventional glow engine mounted on its side to
maintain the clean lines of the airplane, or easily converted to electric power for silent racing!
Whatever version you choose the Denight is just that little bit different to guarantee you an
audience at your local flying field.

  • Authentic UltraCote® trim scheme is a realistic reproduction of the paint scheme on the full-scale version flown by Bart DeNight himself
  • Prepainted fiberglass cowl provides ample room for side mounting single-cylinder engines with very little trimming
  • Two-piece plug-in wing makes for shorter assembly time and is especially convenient for storage and transport
  • Painted pilot head included
  • Motor mount for electric power included
  • Removable top hatch for easy access to electronics
  • Pre-hinged ailerons and rudder
  • Control horns installed
  • Painted fiberglass cowl and wheel pants
  • All necessary hardware included
  • Wingspan: 58.5 in (1486mm)
  • Overall Length: 45.4 in (1153mm)
  • Wing Area: 626 sq in (40.4 sq dm)
  • Flying Weight: 6.25–7 lb (2.8–3.2 kg)
  • Engine Size: .46–.52 2-stroke.72–.82 4-stroke
  • Motor Size: Power 46 brushless
  • Radio: 4–6 channels
  • Servos: 5 standard servos (4 servos for EP)
  • Trim Scheme Colors: Flame Red (HANU883), Cream (HANU878)

Needed to Complete:

  • Glow Power
  • 4+ channel radio system with 5 servos
  • Engine
  • Propeller and spinner
  • Electric Power
  • 4+ channel radio system with 4 servos
  • Electric motor
  • Speed control
  • Battery pack
  • Propeller and spinner

Recommended Engine Set up:

  • Motor EVO- 46/52
  • Radio Spektrum DX5/DX6i/DX7
  • Servos 5 standard servos (SPM3702) or (SSV9704)
Recommended Electric Set up:
  • Motor Power 46 Outrunner Brushless 670Kv (EFLM4046A)
  • Speed Controller 60Amp Brushless (EFLA1060)
  • Battery 4 cell Li-Po 14.8Volt 3200Mah (EFLB32004S)
  • Radio Spektrum DX5/DX6i/DX7
  • Servos 4 standard servos (SPM3702) or (SSV9704)
  • Prop 13 x 8e Thin electric (HFL7631)
AnteprimaAllegatoDimensione
DeNight_Special_50_manual.pdf2.49 MB