P-51D Mustang 40 ARF
Prodotti simili
The P-51D Mustang 40 ARF combines the simple assembly and easy-going flight characteristics of a .40-size sport plane with the sharp looks of the most famous warbird of all time. And you can outfit it with a wide range of powerplants to make it as mild or wild as you want. You also have the option of adding functioning flaps and retractable landing gear for a little extra performance and realism.
Needed to Complete
Glow Power
- 4+ channel radio system with 5 servos (6+ channel radio with 8 servos required for flaps and retracts)
- Engine
- Propeller and spinner
Electric Power
- 4+ channel radio system with 4 servos (6+ channel radio with 7 servos required for flaps and retracts)
- Electric motor
- Speed control
- Battery pack
- Propeller and spinner
- Lightweight, all-wood construction
- Genuine UltraCote® trim scheme
- Painted fiberglass cowl
- Two-piece plug-in wing
- Bolt-on tail
- Optional functioning flaps
- Motor mount for electric power included
- Painted pilot figure included
- All necessary hardware included
- Retract-ready
- Wingspan: 58.25 in (1479.55mm)
- Overall Length: 50.39 in (1280mm)
- Wing Area: 626 sq in (40.39 sq dm)
- Flying Weight: 6.5–7 lb (2.95–3.18 kg)
- Engine Size: .40–.52 (2-stroke) .62–.82 (4-stroke)
- Motor Size: Power 46
- Radio: 4–7 channels
- Servos: 5 + 2 for flaps + 1 for retracts
- Flaps: Optional with the addition of 2 standard servos
- Retracts: Optional with the addition of 2 standard servos
- Scale: Yes, Warbird
Needed to Complete
Glow Power
- 4+ channel radio system with 5 servos (6+ channel radio with 8 servos required for flaps and retracts)
- Engine
- Propeller and spinner
Electric Power
- 4+ channel radio system with 4 servos (6+ channel radio with 7 servos required for flaps and retracts)
- Electric motor
- Speed control
- Battery pack
- Propeller and spinner
Bulletins
P-51D Sport 40 ARF Retract Addendum
HANGAR 9
P-51D Mustang Sport 40 ARF
Retract Template Dimension Correction
Important: The spacing of 3 15/16-inch (100mm) provided in the manual on page 42 step 1 for the alignment of the retract template is stated incorrectly. The correct spacing should be 3 9/16-inch (90mm).
