ParkMaster 3D
Prodotti simili
With the ParkMaster 3D you can now fly aerobatics outdoors just like you do indoors! Designed by world renowned R/C pilot and German Indoor Aerobatics Champion, Martin Muller, the ParkMaster is built from the ultra durable ELAPOR® foam making it tough enough for everyday flying. The PARKMASTER 3D can also be flown outdoors in moderate wind, something you can’t do with your typical indoor “foamy” models”. When built out with the optional Flight (#M999233) and Power (M#993233) the ParkMaster 3D will have all the power and control need to fly the most difficult 3D maneuvers.
- Pre-fabricated molded ELAPOR® foam parts
- Fully 3-D capable
- Ultra Low Wing Loading
- Ideal for Honing Your 3D skils
Kit contents:Molded ELAPOR® parts, Carbon Fiber / Glass Filled Plastic Spars and fuselage longerons, all plastic parts required to assemble the model, small items and linkage components, decal sheet, detailed0 instructions.
Now In stock
Check out the Review of the ParkMaster 3D on RC Groups.
- Wingspan 980 mm
- Overall length 1000 mm
- All-up weight ca. 520 g
- Total surface area 29 dm²
- Wing loading min. 18 g/dm²
- Functions Aileron, elevator, rudder, throttle
- Moulded ELAPOR® parts,
- CFRP and GRP spars and fuselage
- longerons,
- all plastic parts required to assemble the model,
- small items and linkage components,
- decal sheet,
- comprehensiveillustrated instructions.
