UMX Hyper Taxi BNF With AS3X Technology
Prodotti simili
EFLU 4780 Ultra Micro Hyper Taxi BNF
E-flite's UMX Hyper Taxi is equipped with AS3X technologyenabling this otherwise unstable aircraft to be flown in a truly spectacular fashion. AS3X is an electronic stabilisation system that allows the model to fly a combination of precision aerobatic and 3D aerobatics with much greater ease and authority. Another major feature of the AS3X system is that the aircraft does not require dual rates or exponential to be flown successfully, ordinary radio settings are sufficient.
Is it an aeroplane or a helicopter? Well based on its flying ability the Hyper Taxi is a mixture of both! It can take off and land vertically on its tail end and also fly forward like a conventionalmodel, thanks in part to the AS3X technology.
The model features a fully integrated Spektrum AS3X ESC/Receiver unit a 180 size brushless outrunner motor 2500Kv and a 2S 1800mAh LiPo battery (one included) allowing plenty of power to handle indoor flight with ease.
The Hyper Taxi is one of the most outstandingly 3D capable models available and is the perfect high performance indoor ultra micro aircraft for intermediate and advanced pilots looking to extend the boundaries of indoor flying.
The powerful radial-caged brushless motor system offers vertical performance that's a blast, plus the UMX Hyper Taxi BNF with the AS3X System can be ready to fly quickly. There's no programming needed – the direction and mixing of the four independent performance ultra micro linear servos is complete.
Available as a Bind and Fly (BNF) model all that the pilot has to do to get this amazing model in the air is to bind the onboard Specktrum AS3X ESC/Receiver unit to a suitable DSM2/DSMX transmitter, charge the included flight battery and the model is ready for 3D flight right out of the box.
- On board stabilisation system (AS3X)
- AS3X allows manoeuvres to be flown that would otherwise be impossible
- Four channel DSM2 technology
- Fully aerobatic and outrageous 3D ability
- 180 size brushless outrunner motor 2500Kv
- 2S 180 mAh LiPo included
- Rigid foam construction for precise flight
- Perfect for indoor flight
- Vivid colors provide excellent orientation capability
- Includes E-flite LiPo battery and balance charger
- Wingspan: 373mm (14.7inch)
- Length: 323mm (12.7inch)
- Wing Area: 695sq. cm. (108 sq. in.)
- Flying Weight: 73g (2.55 oz.)
- Motor: BL180 brushless outrunner 2500kv (EFLUM180BL2)
- Battery: 180mAh 2S 7.4Volt 20C Li-Po 26AWG (EFLB1802S20)
- Servos: SPMSA2030L (x4)
- Approx Flying Duration: 5-8 minutes
