UMX Extra 300 3D BNF Basic
Prodotti simili
Nuova Versione BNF BASIC!!! Solo Modello !!!
Batteria e Caricabatteria venduti separatemente !!!
Ideale per chi è già in possesso di tali accessori e non vuole farne collezione !!!
The UMX Extra 300 3D makes the dream of a 3D plane that flies almost anywhere a reality. With a flying weight of barely over an ounce (just 33 grams), battery and all, it is slow and light enough to fly extreme 3D maneuvers in spaces no larger than a dining or conference room. Its ingenious laser-cut foam airframe, designed by ETOC champ Seth Arnold, makes it all possible. And this BNF Basic version is ideal for the pilotwho already has the required battery and charger and who simply wants the plane. It comes completely assembled with a punchy 8.5mm coreless brushed motor and Spektrum™ AR6400L Ultra Micro DSM2® Receiver/ESC installed. Built-in long-throw servos on the AR6400L drive the elevator and rudder while two independent Spektrum AS2000L long-throw ultra microservos drive the ailerons. The battery and charger are sold separately.
Needed to Complete
- 4+ channel DSM2/DSMX computer transmitter
- 1-Cell 3.7V LiPo battery
- Charger for 1-cell LiPo batteries
- Completely built with servos, power system and Spektrum 2.4Ghz DSM2 Receiver installed, but without the battery and charger
- Small and light enough for experienced pilots to fly almost anywhere indoors
- Advanced laser-cut flat foam structure and carbon reinforcement results in a lighter structure providing high-performance 3D flight in an indoor space
- Requires a DSM2/DSMX aircraft transmitter, 1S Li-Po battery and charger – Sold Separately
- Wingspan: 16.8 in (427mm)
- Overall Length: 19.4 in (494mm)
- Wing Area: 74 sq in (4.8 sq dm)
- Flying Weight: 1.2 oz (32.5g)
- Motor Size: 8.5mm Coreless Brushed
- Trim Scheme Colors: Red, Grey, Clear, Black
- Prop Size: 130mm x 70mm
- Recommended Battery: 3.7V 1-Cell 150mAh LiPo (sold separately)
- Approx. Flying Duration: 4-8 minutes
- Scale: Ultra Micro
- Minimum Age Recommendation: 14 years
- Experience Level: Advanced
- Recommended Environment: Indoor
- Assembly Time: Less than 1 Hour
- Is Assembly Required: No
Needed to Complete
- 4+ channel DSM2/DSMX computer transmitter
- 1-Cell 3.7V LiPo battery
- Charger for 1-cell LiPo batteries
