Carbon-Z Yak 54 PNP
Prodotti simili
The Carbon-Z™ Yak 54 is a quantum leap in unlimited aircraft design that uses patent pending Carbon-Z construction. The brainchild of world aerobatic champion, Quique Somenzini, it comes out of the box equipped with the phenomenal brushless Q-Power system and digital high-speed servos. The combination of these high-performance components with the light weight and superb rigidity of the Carbon-Z airframe result in a 3D airplane with a 2:1 thrust-to-weight ratio that knows no limits.
Best of all, you can have this Plug-N-Play® version airborne in just a few minutes. All you need is a full range aircraft transmitter and receiver, a 4S 14.8V 2800mAh Li-Po battery, and a 4S Li-Po charger. To get the most from the Carbon-Z Yak 54, a programmable aircraft transmitter with dual rates and exponential function is recommended.
Needed to Complete
- A full range aircraft transmitter (with programming capabilities highly recommended)
- Compatible full range receiver
- 4S 14.8V LiPo Battery (2800mAh+) and compatible charger
- Exceptionally strong and lightweight Carbon-Z airframe
- High-output 25-size brushless power system installed
- E-flite 60A Pro brushless ESC installed
- Digital high-speed metal gear servos installed
- High-performance prop optimized for precision and 3D flying
- Low friction carbon rod hinges
- Replaceable wings, stab, landing gear and control surfaces
- Quickly disassembles for transport or storage in this box
- Requires a full range aircraft transmitter, receiver, battery and charger (sold separately)
- Wingspan: 48.0 in (1220mm)
- Overall Length: 48.5 in (1230mm)
- Wing Area: 525 sq in (34.0 sq dm)
- Flying Weight: 3.75-3.80 lbs (1.70-1.73kg)
- Motor Size: 25-size 1,000Kv Brushless Outrunner (included)
- Radio: 6+ Channel Transmitter and Receiver
- Trim Scheme Colors: Red Pantone 185C, Blue Pantone 286C
- CG (center of gravity): At wing tip, 6 inches (153mm) forward from the aileron trailing edge
- Wing Loading: 16.2 oz/sq foot (50.14 grams/sq dm)
- Prop Size: 12 x 5.25 (305 x 133mm) (included)
- Spinner Size: 1.57 in (40mm)
- Speed Control : 60-Amp Pro Switch-Mode BEC Brushless (included)
- Recommended Battery: 2,800mAh 4S 14.8V LiPo
- Flaps: No
- Retracts: No
- Control Throw (Ailerons): Low: 30mm, High: 65-70mm up/down at aileron root
- Control Throw (Elevator): Low: 15mm, High: 48-50mm up/down at counter balance leading edge
- Control Throw (Rudder): Low: 45mm, High: 65mm right/left at counter balance leading edge
- Approx. Flying Duration: 5 minutes
- Minimum Age Recommendation: 14 years
- Experience Level: Intermediate
- Recommended Environment: Outdoor
- Assembly Time: Less than 1 Hour
- Is Assembly Required: Yes
Needed to Complete
- A full range aircraft transmitter (with programming capabilities highly recommended)
- Compatible full range receiver
- 4S 14.8V LiPo Battery (2800mAh+) and compatible charger
- 60-Amp Pro Switch-Mode BEC Brushless ESC
- 13g Sub Micro Servo
