Power 90 Brushless Outrunner Motor 325Kv
Prodotti simili
Designed to deliver clean and quiet power equivalent to or surpassing the power of a 90-size 2-stroke glow engine for sport and scale
Designed to deliver clean and quiet power equivalent to or surpassingthe power of a 90-size 2-stroke glow engine for sport and scale airplanes weighing 8 to 13 pounds (3.6 to 5.9 kg), 3D airplanes up to 10pounds (4.5 kg), or models requiring up to 1800 watts of power. It willprovide excellent 3D performance for the Hangar 9 Frenzy 100 ARF, ShowTime 4D 90 ARF, Funtana X 100 ARF and other similar class models. The Power 90 also provides great power and performance for the Seagull Ultimate Bi-Plane 90 ARFs.
Needed to Complete
- 6S–8S Li-Po or 18-26 Ni-MH /Ni-Cd
- 16x8 to 18x8 electric props
- 85A High Voltage Brushless ESC
- Equivalent to or surpassing the power of a 90-size, 2-stroke, glow engine for sport and scale airplanes weighing 8 to 13 lb (3.6 to 5.9 kg)
- Ideal for 3D airplanes weighing up to 10 lb (4.5 kg)
- Ideal for models requiring up to 1800 watts of power
- High torque, direct drive alternative to inrunner brushless motors
- External rotor design for better cooling
- High-quality construction with ball bearings and hardened 6mm steel shaft
- Includes mount and mounting hardware with two 10mm prop shaft adapters tapped out for 8-32 threads
- Type: Brushless outrunner motor
- Size: Equivalent to or surpassing the power of a 90-size 2-stroke glow engine
- Bearings or Bushings: One 6 x 19 x 6mm Bearing, and One 6 x 15 x 5mm Bearing
- Wire Gauge: 13
- Recommended Prop Range: 16x8 to 18x8
- Voltage: 21.6–31.2V
- RPM/Volt (Kv): 325Kv
- Resistance (Ri): 02 ohms
- Idle Current (Io): 2.00A @ 10V
- Continuous Current: 50A
- Maximum Burst Current: 65A (15 sec.)
- Cells: 6S–8S Li-Po or 18–26 Ni-MH/Ni-Cd
- Speed Control: 85A High Voltage Brushless
- Weight: 450 g (15.8 oz)
- Overall Diameter: 56mm (2.20 in)
- Shaft Diameter: 6mm (.24 in) (Includes two 10mm threaded prop shaft adapters with 1.5 pitch)
- Overall Length: 52mm (2.00 in)
Needed to Complete
- 6S–8S Li-Po or 18-26 Ni-MH /Ni-Cd
- 16x8 to 18x8 electric props
- 85A High Voltage Brushless ESC
Tech Notes
Maximum operating temperature: 220 degrees Fahrenheit.
Adequate cooling is required for all motor operation at maximum current levels.
Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.
