Park 300 Brushless Outrunner Motor, 1380Kv

Home › Elettronica › Motori › Outrunner
Codice prodotto: EFLM1150
Produttore: E-Flite
Il prezzo della consegna standard per questo articolo è di €9,50 (la spedizione è gratuita per ordini superiori a 99€). Gli ordini inseriti oggi prima delle 15.00 CET verrano evasi entro le 24 ore successive (eccetto per articoli su ordinazione/presso fornitore/non in stock).
Disponibile presso il nostro fornitore 5 giorni (da verificare)
37.99€
28.90€ iva inclusa
Stampa
Segnala

Ideal for 3D models 6–9 oz (170–255 g), and sport and scale models 8–12 oz (225–340 g) or models requiring up to 85 watts of power.

 

Needed to Complete

  • 8A–10A Brushless ESC
  • 6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
  • 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
  • Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
  • High-torque, direct-drive alternative to inrunner brushless motors
  • Ideal for models requiring up to 85 watts of power
  • Integrated prop saver design
  • Mount, prop adapter and hardware included
  • External rotor design with 3.2mm shaft
  • Low noise level
  • Type: Brushless outrunner
  • Size: 180/280 replacement
  • Bearings or Bushings: Two 3.175 x 7.94 x 3.6mm Bearings
  • Recommended Prop Range: 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
  • Voltage: 7.2–11.1V
  • RPM/Volt (Kv): 1380
  • Resistance (Ri): .33 ohms
  • Idle Current (Io): .40A @ 8V
  • Continuous Current: 7A
  • Maximum Burst Current: 9A (15 sec)
  • Cells: 6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
  • Speed Control: 8–10A brushless
  • Weight: 24 g (.8 oz)
  • Overall Diameter: 28mm (1.10 in)
  • Shaft Diameter: 3.17mm (1/8 in)
  • Overall Length: 22mm (.90 in)


Needed to Complete

  • 8A–10A Brushless ESC
  • 6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
  • 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer

 

Tech Notes

Maximum operating temperature: 220 degrees Fahrenheit.

Adequate cooling is required for all motor operation at maximum current levels.

Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.

 

Support:

 

AnteprimaAllegatoDimensione
EFLPark300OutrunnerInstructions.pdf71.43 KB