Park 250 Brushless Outrunner Motor 2200Kv

Home › Elettronica › Motori › Outrunner
Codice prodotto: EFLM1130
Produttore: E-Flite
Il prezzo della consegna standard per questo articolo è di €9,50 (la spedizione è gratuita per ordini superiori a 99€). Gli ordini inseriti oggi prima delle 15.00 CET verrano evasi entro le 24 ore successive (eccetto per articoli su ordinazione/presso fornitore/non in stock).
Disponibile presso il nostro fornitore 5 giorni (da verificare)
31.90€
27.90€ iva inclusa
Stampa
Segnala

Ideal for 3D models 4–6 oz (115–170 g), and sport and scale models 6–12 oz (170–340 g) or models requiring up to 55 watts of power.

 

Needed to Complete

  • 6–10A brushless ESC
  • 2S Li-Po or 5- to 7-cell Ni-Cd/Ni-MH
  • 5.5 x 4.5–8 x 6 Slow Flyer prop
  • Ideal for 3D models 4–6 oz (115–170 g) and sport and scale models 6–12 oz (170–340 g)
  • Up to 55 watts
  • Designed for firewall mount or carbon tube mount
  • Integrated Prop Saver design
  • Extremely quiet and lightweight—just .5 ounces (14 grams)
  • Upgraded performance motor for indoor IPS and 180 motors
  • High-torque, direct-drive alternative to inrunners
  • Includes mount, mounting hardware and 2mm gold BL connectors
  • High-quality construction with ball bearings and hardened steel shaft
  • Great lightweight outrunner for small indoor foamies
  • Type: Brushless outrunner
  • Size: Upgrade for 180-size
  • Bearings or Bushings: Two 2 x 5 x 2.5mm Bearings
  • Recommended Prop Range: 5.5 x 4.5–8 x 6 Slow Flyer
  • Voltage: 6–8.4V
  • RPM/Volt (Kv): 2200
  • Resistance (Ri): .25 ohms
  • Idle Current (Io): .45A
  • Continuous Current: 7A
  • Maximum Burst Current: 8A (15 sec)
  • Cells: 6 Ni-MH/Ni-Cd or 2 Li-Po
  • Speed Control: 6A–10A brushless
  • Weight: 14 g (0.5 oz)
  • Overall Diameter: 22mm (.85 in)
  • Overall Length: 23mm (.90 in)

 

Needed to Complete

  • 6–10A brushless ESC
  • 2S Li-Po or 5- to 7-cell Ni-Cd/Ni-MH
  • 5.5 x 4.5–8 x 6 Slow Flyer prop

 

Tech Notes

 

Maximum operating temperature: 220 degrees Fahrenheit.

Adequate cooling is required for all motor operation at maximum current levels.

Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.

 

Indoor 3D setup
  • Weight w/Battery: 4.3 oz (122g)
  • Prop: 6 x 5 Slow Flyer
  • Battery: 480mAh 2-Cell 7.4V LIPO (THP4802SJPL)
  • ESC: 10A Brushless

Extreme 3D performance. Will hang on the prop at ½ stick and when you add full throttle it takes off straight up like a rocket.

 

Indoor Slow Flyer Setup
  • Weight w/Battery: 8.2 oz (232g)
  • Prop: 7 x 4 Slow Flyer
  • Battery: 480mAh 2-Cell 7.4V LIPO (THP4802SJPL)
  • ESC: 10A Brushless
Great power for scale slow flying performance.

 

AnteprimaAllegatoDimensione
EFLPark250OutrunnerInstructions.pdf125.96 KB