Park 180 Brushless Outrunner Motor, 2200Kv

Home › Elettronica › Motori › Outrunner
Codice prodotto: EFLM1120
Produttore: E-Flite
Il prezzo della consegna standard per questo articolo è di €9,50 (la spedizione è gratuita per ordini superiori a 99€). Gli ordini inseriti oggi prima delle 15.00 CET verrano evasi entro le 24 ore successive (eccetto per articoli su ordinazione/presso fornitore/non in stock).
Non disponibile
Lascia la tua email e ti avviseremo all'arrivo del prodotto.
31.99€
28.90€ iva inclusa
Stampa
Segnala

Ideal for 3D models 2–3 oz (55–85 g), and sport and scale models 3–6 oz (85–
170 g) or models requiring up to 30 watts of power.

 

Needed to Complete:

 

  • 4-6A Brushless ESC
  • 2-3S Li-Po or 4-8 cell Ni-Cd/Ni-MH
  • 3x3 Direct Drive Prop
  • Ideal for 3D models weighing 2–3 oz (55–85 g) and sport and scale models weighing 3–6 oz (85–170 g)
  • Ideal for indoor and outdoor small aerobatic park flyers
  • Extremely quiet and lightweight—just .3 oz (8.5 g)
  • High-torque, direct-drive alternative to inrunner brushless motors
  • Designed for firewall mount or carbon tube mount
  • 4- to 8-cell Ni-Cd/Ni-MH or 2–3S Li-Po
  • Up to 30 watts
  • Includes prop adapter
  • Includes mount, mounting hardware and 2mm gold BL connectors
  • Upgraded performance for indoor motors
  • High-quality construction with ball bearings and hardened steel shaft
  • Type: Brushless outrunner
  • Size: 180
  • Bearings or Bushings: Two 1.5 x 4 x 2mm Bearings
  • Recommended Prop Range: 3x3 to 6x3 ‘Direct Drive’ for 2S or 4x4 or 4.5x3 for 3S
  • Voltage: 4.8–11.4V
  • RPM/Volt (Kv): 2200
  • Resistance (Ri): .91 ohms
  • Idle Current (Io): .30A @ 8V
  • Continuous Current: 2.6A
  • Maximum Burst Current: 3.2A (15 sec)
  • Cells: 2–3S Li-Po or 4–8 Ni-Cd/Ni-MH
  • Speed Control: 4–6A brushless
  • Weight: 8.5 g (.30 oz)
  • Overall Diameter: 16mm (.63 in)
  • Shaft Diameter: 1.5mm
  • Overall Length: 20mm (.80 in)

Needed to Complete:

  • 4-6A Brushless ESC
  • 2-3S Li-Po or 4-8 cell Ni-Cd/Ni-MH
  • 3x3 Direct Drive Prop
:
Tech Notes

Maximum operating temperature: 220 degrees Fahrenheit

Adequate cooling is required for all motor operation at maximum current levels.

Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.

AnteprimaAllegatoDimensione
EFLPark180OutrunnerInstructions.pdf119.56 KB