Six-Series Brushless 2700Kv Motor (28mm)

Home › Elettronica › Motori › Innrunner
Codice prodotto: EFLM2005
Produttore: E-Flite
Il prezzo della consegna standard per questo articolo è di €9,50 (la spedizione è gratuita per ordini superiori a 99€). Gli ordini inseriti oggi prima delle 15.00 CET verrano evasi entro le 24 ore successive (eccetto per articoli su ordinazione/presso fornitore/non in stock).
Disponibile
48.90€ iva inclusa
Stampa
Segnala

Six-Series Brushless 6-pole motors are high-torque motors suitable for either direct drive or geared applications. They feature the same diameter and mounting hole pattern as brushed 400 and 480 motors so theymake excellent upgrades for these classes of models. Six-Series motors are ideal for direct-drive applications such as hotliners and other LMR products weighing 18- to 28-ounces. They are also ideal for 3D and aerobatic models weighing 28- to 35-ounces, and for scale park flyers weighing 25- to 40-ounces, when using a gearbox. This is a perfect matchfor aerobatic and 3D models like the E-flite Brio 10 (EFL2275) when using a gearbox, and pylon racers and hotliners when using direct drive.
  • Perfect match for 3D and aerobatic models weighing 28–35 oz (790–990 g) using a gearbox
  • Ideal for scale park flyers weighing 25–40 oz (710–1140 g) using a gearbox
  • Ideal direct-drive motor in models 18–28 oz (510–800 g)
  • Ideal for models requiring up to 400 watts of power
  • Perfect upgrade for brushed 400 and 480 motors with same diameter and mounting hole pattern
  • High-torque, 6-pole slotted rotor design
  • Includes connectors, prop adapter and mounting hardware
  • High-quality construction with ball bearings and hardened steel 3.2mm shaft
  • Type: 6-pole inrunner
  • Size: 400/480 upgrade
  • Bearings or Bushings: Two 4 x 10 x 4mm Bearings
  • Recommended Prop Range: 5x4 to 6x5.5 direct drive or 10x6 to 12x6 with 2:1 to 3:1 gearbox
  • Voltage: 7.2–12
  • RPM/Volt (Kv): 2700
  • Resistance (Ri): .03 ohms
  • Idle Current (Io): 2.05A @ 10V
  • Continuous Current: 34A
  • Maximum Burst Current: 42A (15 sec)
  • Cells: 6–10 Ni-MH/Ni-Cd or 2–3S Li-Po
  • Speed Control: 35–45A brushless
  • Weight: 80 g (2.9 oz)
  • Overall Diameter: 28mm (1.10 in)
  • Shaft Diameter: 3.17mm (1/8 in)
  • Overall Length: 36mm (1.40 in)

 

Needed to Complete

  • 35–45A brushless ESC
  • 6- to 10-cell Ni-MH/Ni-Cd or 2–3S Li-Po
  • 5x4 to 6x5.5 direct drive or 10x6 to 12x6 props with 2:1 to 3:1 gearbox

Tech Notes

  • Maximum Operating Temperature: 220 degrees Fahrenheit
  • Adequate cooling is required for all motor operation at maximum current levels.
  • Maximum Burst Current duration is 15 seconds. Adequate time between maximum burst intervals is required for proper cooling and to avoid overheating the motor.
  • Maximum Burst Current rating is for 3D and limited motor run flights. Lack of proper throttle management may result in damage to the motor since excessive use of burst current may overheat the motor.

 

AnteprimaAllegatoDimensione
EFLSixSeries2700KvInstructions.pdf80.58 KB
EFL_Brushless_Motors_Ad.pdf3.85 MB