CASTLE CREATIONS PHOENIX 80 (PHX-80)

Codice prodotto: PHX-80
Produttore: Castle Creations
Il prezzo della consegna standard per questo articolo è di €9,50 (la spedizione è gratuita per ordini superiori a 99€). Gli ordini inseriti oggi prima delle 15.00 CET verrano evasi entro le 24 ore successive (eccetto per articoli su ordinazione/presso fornitore/non in stock).
Non disponibile
Lascia la tua email e ti avviseremo all'arrivo del prodotto.
168.90€
129.90€ iva inclusa

CASTLE CREATIONS PHOENIX 80 (PHX-80)

The Phoenix-80 is the ultimate high power sensorless control with a whopping 120-amp surge rating! Despite its high current capability the Phoenix-80 is still a compact, lightweight alternative to other controls on the market. At a mere 2.1 ounces (60g) with full length wires, the controller is still packed with features! It comes with the full range of Phoenix programming options including adjustable switching rate, programmable brake and several timing modes for the ultimate in competition controllers.
Specially designed for LMR competition gliders, F5D pylon racers, F5B competition sailplanes, and large helicopters. Use it in any very high-power brushless system, like the Aveox F-series competition motors, Astro 05 pylon motor, low-turn competition Hacker and Kontronik motors, and Mega 2230/2245 (1 or 2 turn) motors.

The Phoenix-80 can be used in either airplane or helicopter installations (including those with collective pitch). Programming is a snap using the on-board LED and your throttle stick - no special equipment is needed

  • Battery Eliminator Circuit (BEC): eliminates receiver battery
  • Safe "Power On"
  • Microprocessor Controlled
  • Tough surface mount construction
  • Audible Arming Signal
  • Auto Motor cut-off with reset
  • Low torque "Soft Start": protects gear boxes and belt drives from shock
  • Smooth reverse exponential throttle
  • Self-calibrating endpoints: maximizes usable stick travel
  • Auto shut-down when signal is lost
  • Simple setup: no complicated switches or wiring
  • Part #: PHX-80
  • Volts w/BEC: 12.6 max
  • Volts NO BEC: 25.2 max
  • Lipo Cells w/BEC: 3S max
  • Lipo Cells NO BEC: 6S max
  • NiCad or NiMh Cells w/BEC: 12 max
  • NiCad or NiMh Cells NO BEC: 20 max
  • Continuous: 80 amps
  • Switching Rate: Programmable (11,22 – 41,00 Khz)
  • Resistance: 0.0001 ohms
  • Brake: Yes
  • Reversibile: Yes - change any two wires
  • Low Voltage Cut-off: Programmable
  • Size: 1.05 x 2.65 x 0.45"
  • Weight (w/wires) 2.10 oz (60g)
  • Connector Type: Universal